Pallet Load Stops for High-Density Rack Systems They are made of steel-welded wire mesh and mounted to the rear of the rack system using either a flush or offset positioning. Wire mesh containment panels – modular-sized panels are usually available in single or double-wide widths. Safety netting is made from polypropylene or nylon and fitted to your specific pallet rack system specs. Safety netting – attaches to the pallet rack system uprights and beams on the front, rear of the system, or underneath rack bays to protect against falling items. Straps allow for a 6” overhang of the pallet. Mount as many as needed per bay and quickly move them as inventory specs change. Rack straps – durable straps made from polyester and elastic webbing mount quickly and easily to rack uprights using metal connectors at the ends. See our blog for more on products to streamline hand stack operations. The best choice will depend on inventory specs and stacking heights within the bay. Alternatively, partial dividers clip-on at the base. Wire backstops can be hung from the bay above and then secured below to form a very secure stop. Wire backstops – vertical wire dividers mounted in the rear of the pallet rack back help protect hand-stacked inventory from falling off the back of the rack shelf.
longitudinal flue spaces, check out our blog for a deep dive. Dimensions and offset size will vary by manufacturer. Select a single-sided flue protector for single rack rows and a double-sided flue protector for back-to-back rows. The type of flue space protector depends on the pallet rack configuration. 3”) use the offset backstop beam.įlue space protectors, or flue guards – steel pallet stops, approximately 6” wide, mounted to the rear beam.
Rack designed for pallets sitting flush with the rear of the rack bay use a flush backstop beam, and systems designed for a slight pallet overhang (approx. Load Stop Protection for Standard Pallet Rack Systemsīackstop beams – bolted between the uprights between 6-12” above the shelf beam, backstop beams prevent the pallet loads from pushing too far into the flue space. Selection depends on the rack type and configuration. Several rack load stop options are available to prevent pallets from intruding into the flue area and to help keep the pallets and inventory secure.
0 kommentar(er)
